Loyalty points available to repeat customers. Please register for them to be applied.
product review overlay image

Product Description

Node 2 / 2i / N130  / N131 / N132 - C3 MK2 Low Jitter Clock installed - Codec IC

  • This is not plug and play and requires Fidelity Audio to install the clock in house.
  • We recommend the psu is upgraded with the interface and external psu before (or at the same time) as the clock.

‘Timing is the essence of musicality’

Replacing the original cheap clock with the accurate C3 MK2 low jitter clock lifts the Node 2 / 2i / N130 / N131 / N132 further up the hifi chain (especially after upgrading the psu). If you are running the Node from it's own internal output you will get good gains from the clock, when using a good off board DAC the gains are significantly better.

Q&A -

Does the clocking improve the performance if using the Nodes internal dacs? Yes 

Does the clocking improve the performance if using an external dac? Yes even more benefits will come, the better the dac the more you will benefit.

Why do I need to clock the Node? The Node has a codec ic that processes all the various digital audio formats, this outputs a digital feed to the internal dac and digital out of the Node. This ic requires a crystal / oscillator (clock signal) to operate and uses it as a reference, by removing the cheap crystal and fitting a much more accurate (and lower noise) clock the reference has become more accurate (greater) allowing the ic to process the digital audio to a much higher standard.


Expect -

  • Greater Timing
  • Extended low bass frequencies
  • Less mid range muddle
  • Cleaner less harsh top end
  • Fuller sound
  • More Separation 

C3 MK2 Info - 

  • Accuracy: +/- 1ppm
  • Measured Jitter less than 0.2PSec (Femtosecond)
  • Stable clock output to 6 decimal places +/- 2 digits
  • Unbuffered output
  • 3 stage Vref circuit
  • Input noise filter circuit
  • SPower Reference derived low noise regulation
  • Super low ESR high ripple Oscon Polymer SVP decoupling capacitors
  • High quality PPS decoupling capacitors
  • 2020uF total capacitance
  • Optimised circuit layout
  • High Precision oscillator
  • Underside ground plane shield
  • High grade copper pcb
  • 5V to 15V input
  • 30mA low current design
  • 55mm x 24mm

Specifications

MPN
Node 2i / N130 / N131 / N132 - C3 MK2 Low Jitter Clock installed
Brand
fidelity audio
Condition
New
Product Code
Node 2i / N130 / N131 / N132 - C3 MK2 Low Jitter Clock installed
Weight
2kg

9 Customer Reviews

Node 2i / N130 / N131 / N132 - C3 MK2 Low Jitter Clock installed

Product Code Node 2i / N130 / N131 / N132 - C3 MK2 Low Jitter Clock installed