GBP £
AUD $ CAD C$ CNY 元/¥ DKK kr EUR € JPY ¥ NOK kr NZD NZ$ PLN zł RUR ₽ SEK kr USD $
Home / Headphone amps
product review overlay image
HPA-200 Headphone Amplifier
HPA-200 Headphone Amplifier

Product Description

HPA200 Headphone Amplifer


Building on the many strengths of the HPA-100, the 200 utilises meatier power supplies and top-of-the-range voltage regulation. The power transformer’s capacity is raised from 15VA to 30VA and in place of the more basic voltage regulators we use our own SPower low noise regulation. Other changes include further tuning the power supply decoupling in the buffer stage and gain stages. These improvements have a profound effect on the musical performance of the HPA-200, unleashing a more dynamic, textured, analogue sound, which is better extended at both extremes of frequency giving the sound a valve like quality. A quality amp that is perfect for high end headphones. 

Just as in the HPA-100 the amp uses high quality audio-grade parts throughout, comes with a 2-year parts and labour warranty and can be customised with your choice of power LED.

Please note: Headphone amplifiers are built to order and due to demand can take up to 14 working days before dispatch.
 
  • Headphone impedance range: 12 to 600 Ohms Headphone
  • Jack: 1/4 inch (6.35mm)
  • Power output: (rms, both channels fully driven) 32 Ohms: >500mW/channel
  • Distortion: (THD + N @ 1kHz): 0.00006%
  • Frequency response: (-3dB) 32 Ohms load: 10Hz – 35kHz; 300 Ohms load: 10Hz – 38kHz
  • Ohms load: 10Hz – 38kHz
  • Channel balance: 0.5dB approx
  • Output Stage: 2x High Performance, low distortion high fidelity 250mA audio buffers
  • Supply voltage: AC 230V +/- 10%
  • DC voltage: Low Noise Linear dual power supply +15V & -15V
  • Size: (approx.) W: 104 x H:56 x D:245 (mm) including controls & feet
  • Weight: 1.04 Kg (1.55 Kg including packaging)
 
  • Hand built to order in UK
  • Dual mono design
  • Large internal dual voltage power supply
  • Ultra Fast HexFred Rectifying Diodes
  • Super low ESR high ripple smoothing capacitors
  • Quality Audio grade parts used throughout
  • High grade pcb copper tracks for optimal signal & voltage transfer
  • Gold Plated RCA Connectors
  • Easily drives Grado (eg 325i), Sennheiser (eg HD650, HD800), Beyerdynamic (eg T1 Tesla) &; AKGs (eg K702 , Q701
  • IEC mains input
  • 2 year parts and labour warranty
  • The unit IS NOT supplied with an RCA lead
  • Mains lead supplied

Specifications

MPN
HPA200 Black
Brand
fidelity audio
Condition
New
Product Code
Fidelity Audio HPA200 Black
Weight
2.1kg

Customer reviews

No reviews left yet
Write A Review

HPA200 Headphone Amplifer


Building on the many strengths of the HPA-100, the 200 utilises meatier power supplies and top-of-the-range voltage regulation. The power transformer’s capacity is raised from 15VA to 30VA and in place of the more basic voltage regulators we use our own SPower low noise regulation. Other changes include further tuning the power supply decoupling in the buffer stage and gain stages. These improvements have a profound effect on the musical performance of the HPA-200, unleashing a more dynamic, textured, analogue sound, which is better extended at both extremes of frequency giving the sound a valve like quality. A quality amp that is perfect for high end headphones. 

Just as in the HPA-100 the amp uses high quality audio-grade parts throughout, comes with a 2-year parts and labour warranty and can be customised with your choice of power LED.

Please note: Headphone amplifiers are built to order and due to demand can take up to 14 working days before dispatch.
 
  • Headphone impedance range: 12 to 600 Ohms Headphone
  • Jack: 1/4 inch (6.35mm)
  • Power output: (rms, both channels fully driven) 32 Ohms: >500mW/channel
  • Distortion: (THD + N @ 1kHz): 0.00006%
  • Frequency response: (-3dB) 32 Ohms load: 10Hz – 35kHz; 300 Ohms load: 10Hz – 38kHz
  • Ohms load: 10Hz – 38kHz
  • Channel balance: 0.5dB approx
  • Output Stage: 2x High Performance, low distortion high fidelity 250mA audio buffers
  • Supply voltage: AC 230V +/- 10%
  • DC voltage: Low Noise Linear dual power supply +15V & -15V
  • Size: (approx.) W: 104 x H:56 x D:245 (mm) including controls & feet
  • Weight: 1.04 Kg (1.55 Kg including packaging)
 
  • Hand built to order in UK
  • Dual mono design
  • Large internal dual voltage power supply
  • Ultra Fast HexFred Rectifying Diodes
  • Super low ESR high ripple smoothing capacitors
  • Quality Audio grade parts used throughout
  • High grade pcb copper tracks for optimal signal & voltage transfer
  • Gold Plated RCA Connectors
  • Easily drives Grado (eg 325i), Sennheiser (eg HD650, HD800), Beyerdynamic (eg T1 Tesla) &; AKGs (eg K702 , Q701
  • IEC mains input
  • 2 year parts and labour warranty
  • The unit IS NOT supplied with an RCA lead
  • Mains lead supplied
No reviews left yet
Write A Review

MPN
HPA200 Black
Brand
fidelity audio
Condition
New
Product Code
Fidelity Audio HPA200 Black
Weight
2.1kg

Customer Reviews

HPA-200 Headphone Amplifier

Product Code Fidelity Audio HPA200 Black
VAT Number: 366988523 Registered company: 12998520
© Copyright 2022   Fidelity Audio All rights reserved