DIY - HC Very Low Noise Linear power supply / voltage regulator

NOTE - No Mundorf / F&T Capacitors fitted or supplied

Based around our out going HC psu we have developed a DIY version for use in many applications. Supplied is a populated pcb without a heatsink (this requires bolting down to a large or small heatsink depending on application)

The power supply utilises an custom triple V REF SPower low noise voltage regulator circuit along with a efficient circuit layout for optimal current flow.

High quality capacitors used through out help maintain low noise performance.

Voltage Output Range Option - 

• 2.5v to 7v
• 2.5v to 14v (recommended for 7V - 14V)
• 2.5v to 32v (recommended for 14V - 32V) (36V max voltage input)

Psu specs -

Can be used as a large low noise voltage regulator

No Mundorf / F&T Capacitors fitted or supplied
Extra Low Noise Spower derived output
Triple Vref
2x Ultrafast Diodes (8A each)
Oscon SEPC capacitors
Rubycon capacitor
Panasonic PPS capacitors
Bipolar Output Transistor,17 A, 150 W, TO-264
1.4V dropout
Up to 12A current capable depending on heat sinks and transformer. *this is the customers responsibility
162mm x 34mm
36V DC maximum input voltage