Menu

Fidelity Audio Hifi Upgrades

Bluesound NODE 2 & 2i Interface with DC Booster & SMPS

£279.00
Bluesound NODE 2 & 2i Interface with DC Booster & SMPS
Bluesound NODE 2 & 2i Interface with DC Booster & SMPS
Bluesound NODE 2 & 2i Interface with DC Booster & SMPS
Bluesound NODE 2 & 2i Interface with DC Booster & SMPS
Bluesound NODE 2 & 2i Interface with DC Booster & SMPS
Bluesound NODE 2 & 2i Interface Pcb with DC Booster and high current SMPS

We are improving the performance of the Node 2i with Interface pcb and high current SMPS further by adding the DC Booster . This solution is not as good as using one of our discrete low noise linear power supplies it certainly improves the performance further over just the Interface and SMPS. You can upgrade to a higher spec psu at a later date while still using the interface and DC Booster

The high current SMPS not only offers lower noise than the standard small internal psu it is also away from the delicate electronics inside the Node 2i ensuring close proximity EMI pollution is much lower. Added to the interface you get a better performing Node 2i.

Expect -
  • More extended low bass frequencies
  • Even less midrange muddle
  • Cleaner less harsh top end
  • Even fuller sound
  • Option to upgrade later.

DC Booster

Designed to sit between a switch mode power supply (smps) and your equipment. The circuit smoothes and cleans the noise from the smps giving your audio product a boost in sound quality. It can also be used after a linear psu. 
  • Filters SMPS noise
  • Quieter noise floor
  • Better ripple rejection
  • Stabilises DC
  • approx 0.1v loss input to output (depending on load)
  • 1V to 32V input
  • 0.205 Ohm DC resistance +/- 5%
  • 5mm x 2.1mm DC input connector
  • 5mm x 2.1mm output plug
  • Adaptors can be added in the options
  • High quality parts used
  • 10 Amp capable pass through

Interface -
  • Custom design for Node 2i
  • Replaces original psu
  • High quality capacitors fitted
  • Improves audio
  • Removes EMI / RFI from inside Node 2i

SMPS PSU -
  • 5V Output
  • 10A max
  • Does not include power cord for SMPS

Installation guide

Bluesound Node 2i install guide
MPN:
bluesound node 2i interface & smps & dc booster
Brand:
Bluesound
Condition:
New
Product Code:
Bluesound Node 2i Interface & smps & DC Booster
Weight:
3kg
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.